Hot Dipped Galvanized Painted RoHS Certified Single Axis Solar Bracket for Sale

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

Hot Dipped Galvanized Painted ROHS Certified Single Axis Solar Bracket for Sale

Factory direct hot-dip galvanised and painted ROHS certified single-axis solar racking system, designed for cost-effective photovoltaic projects, adopts hot-dip galvanised anti-corrosion process (zinc layer thickness ≥65μm) and environmentally friendly painting technology, ROHS heavy metal free certification, suitable for ground-mounted power stations, industrial and commercial rooftops, and complex terrain. With intelligent single-axis tracking technology (±45° dynamic adjustment), the system improves power generation efficiency by 25%-35%, combines durability and environmental compliance, and supports the rapid delivery of 100 MW projects.

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

Core Advantages

1. Industrial grade anti-corrosion performance

Hot-dip galvanising + double-sided coating: uniform zinc layer coverage, passing 3000 hours salt spray test (no red rust), surface sprayed epoxy resin + polyurethane coating, acid and alkali resistant (pH 2-12), UV aging resistant.
C5M anti-corrosion grade: designed for coastal, chemical park, high humidity environment, service life ≥ 30 years.

2. Environmental Compliance Guarantee

ROHS certification: All materials are free of lead, cadmium other 10 hazardous substances, complying with EU environmental standards and supporting export to the European market.
Carbon Footprint Optimisation: 95% of materials are recyclable, 30% reduction in production energy consumption, EPD international environmental protection certification.

3. High strength structural design

Q345B high-strength steel main beam: wind load resistance up to 65m/s (Class 15 typhoon), snow load 6000Pa, IEC 62817 structural certification.
Single bearing weight of 7 tonnes/group: compatible with double-sided modules, 210mm oversize and PERC/HJT technology, supporting flexible arrangement.

4. Intelligent tracking and efficient power generation

AI light-sensing algorithm: average daily power generation is increased by more than 30%, and cloudy day mode automatically switches to fixed inclination energy-saving mode (power consumption <0.1kWh/day).
Double-sided module optimisation: adjustable height from 1.5m-3.5m above the ground, backside power generation gain increased by 15%-20%.

5. Rapid deployment and low-cost O&M

Modular pre-assembly design: 50% less on-site welding, adaptable to helical piles, concrete and ballast foundation, daily installation capacity ≥ 8MW.
Self-lubricating bearings + hydrophobic coating: annual maintenance cost <0.5% of power generation gain, automatic reset to safe angle (25°) after disaster.

Installation and Maintenance Guide

Installation steps

Foundation construction: Select pile foundation according to load requirements, horizontal error ≤1.5°.
Bracket assembly:
Main beam and column bolt fastening torque 70N-m±5%, guide rail spacing adapted to component border (error ±1mm).
System integration:
Installation of IP68 protection motor, connection of light sensor and PLC controller, calibration of tracking zero point (accuracy ± 0.5 °).
Test high wind reset response (wind speed ≥18m/s automatically switch to wind resistant angle, delay <2 seconds).

Maintenance Recommendations

Monthly inspection: clean track debris, check bolt anti-loosening marks, coating integrity (use coating thickness gauge).
Annual maintenance: lubricate bearings (high temperature lithium grease), update control software, test earthing resistance (≤4Ω).
Post-disaster treatment: forced reset of brackets after typhoon/sandstorm, check structural deformation and electrical connections.
 

 

Typical Application Scenarios
Large-scale ground power station: desert, Gobi, mudflats and other GW-level centralised PV projects.
Industrial and commercial rooftops: distributed power generation in factories, warehouses and commercial complexes, suitable for tilted roofs.
Agricultural photovoltaic complementary system: adjustable height of the support (2m-4m), compatible with crop cultivation and photovoltaic power generation.
Coastal PV: Salt spray resistant design, suitable for harbours, islands and tidal zones.
International assistance projects: ROHS certification helps to enter the European and American markets and support the clean energy transition of emerging countries.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1: What are the specific requirements for ROHS certification?

A: The products are ROHS certified, the content of lead, cadmium, other hazardous substances in the materials are less than 0.01%, which is in line with the EU export regulations.

Q2: How does the hot dip galvanised layer perform in acid rain environment?

A: The zinc layer can still maintain a thickness of ≥25μm in a pH 4 environment, and laboratory tests show no red rust penetration for 5000 hours, with a life span of ≥30 years.

Q3: Does it support double-glass modules and tracking linkage?

A: Completely compatible! The track spacing can be adjusted to 30-60mm, and the back side is reserved for ventilation gap to maximise the double-sided rate gain.

Q4: What is the delivery cycle for 100MW projects?

A: Standardised production + regional warehousing, 100MW projects only take 8-12 weeks from order to grid connection (including foundation construction).

Q5: What are the warranty and after-sales service terms?

A: We provide 10-year main structure warranty, 5-year drive system warranty, 72-hour global emergency response, and lifetime free coating repair support.