High-Efficiency Customizable Single Axis Solar Tracker Bracket Wholesale Energy Solution for Commercial & Industrial Use

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

Designed for Industrial and Commercial Scenarios | Highly Customisable | Bulk Supply Solutions
The product adopts modular single-axis tracking bracket technology, supports intelligent angle adjustment (±45° dynamic tracking), and is suitable for bifacial modules and ultra-long size PV panels. With AI light-sensing algorithm and triple wind-resistant structure, the average daily power generation is increased by 35%-50% compared with fixed racking, and it provides a 10-year warranty for the main structure, helping customers achieve large-scale deployment of clean energy.

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

Core Parameters.

Material: Q345B carbon steel + hot dip galvanised (zinc layer thickness ≥85μm)
Load capacity: 10 tonnes for single set of bracket, compatible with double sided modules/2600mm long size
Protection level: IP68 motor + wind pressure resistant design (wind load ≥ 120km/h)
Adjustment range: ±45° dynamic tracking + 10°-60° manual tilt adjustment
Compatibility: Support PERC/HJT/Calcium-Titanium technology, adapt to mainstream inverter brands.
 

Core Advantages

1. Efficient Power Generation Performance

AI Intelligent Tracking.
Combine with weather data to dynamically adjust the angle, the average daily power generation is increased by 40%, and the power consumption in cloudy mode is <0.1kWh/day.
Supports linkage with energy storage system to realise peak shaving and valley filling.

2. Customisable services

Flexible adjustment of parameters.
Supports 10+ customised parameters such as load-bearing, rail spacing, height above ground, etc., adapting to different roofs and terrains.
Fast delivery.
Standardised modules + regional warehousing, 100MW project only takes 8-12 weeks from order to grid connection.

3. Wind-resistant and durable design

Triple wind-resistant structure.
Tie ropes are installed around the columns (120m/s wind load), and the main beams are designed with triangular reinforcements, passing the IEC 62817 wind test.
Weather resistant coating.
Hot dip galvanised layer + epoxy primer + polyurethane top coat, salt spray test life ≥ 5000 hours (no red rust).

4. Low cost O&M

Annual maintenance cost <0.5% of power generation revenue, support remote monitoring and fault warning.
Provide free coating repair service with unlimited times during the warranty period.


 

 

Installation and Maintenance Guide
Installation Procedure

Foundation Survey.
Use total station to check the roof load bearing ≥150kg/m², slope error ≤5°.
Bracket assembly.
Main beam bolt tightening torque 80N-m±5%, rail installation error ≤1mm.
System co-ordination.
Install IP68 motor and light sensor, calibrate the initial inclination angle (accuracy ±0.5°).
Maintenance Recommendations

Monthly inspection.
Clean the dust accumulated on the guide rail, check the coating scratches (local repair ≤ 5mm).
Tighten bolts with anti-loosening marks and lubricate the guide rails (lithium grease NLGI grade 2).
Annual maintenance.
Replace the drive bearing (-40ºC~120ºC grease resistant), update the control software.
Typical Application Scenarios
Industrial and commercial rooftop: distributed power generation in factories and warehouses, suitable for highly polluted environments.
Large-scale ground power station: Desert, Gobi and other arid areas, suitable for double-sided modules, agricultural and solar complementary.
International assistance projects: CE/RoHS certification helps to enter the European, American and Southeast Asian markets.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1: How does the system cope with strong wind?

A: Rope design around the column (120m/s wind load) + triangular reinforcement structure, passed IEC 62817 standard test.

Q2: Does it support different brands of inverters?

A: Completely compatible! It provides Modbus/RS485 universal interface, which is suitable for Huawei, SMA and other mainstream brands.

Q3: What is the delivery cycle for 100MW projects?

A: Standardised production + regional warehousing, 100MW projects only take 10-14 weeks from order to grid connection.

Q4: What is the corrosion resistance?

A: Triple protective coating design, lab tests show that the life expectancy in salt spray environment is ≥25 years.

Q5: How to deal with deformation problem during the warranty period?

A: Free laser calibration service is provided and structural reset is completed within 24 hours.