Product Description
An industrial grade photovoltaic carport designed specifically for areas with frequent winds, high salinity, and sandstorms. It features a high-strength galvanized steel frame and a wind resistant modular structure, capable of withstanding 50 meters per second (180 kilometers per hour) of strong wind and sand erosion, and is suitable for extreme climate scenarios such as the Middle East and North Africa. The top is equipped with N-type TOPCon high-efficiency photovoltaic modules, with intelligent adjustment of tilt angle (5 ° -25 °), balancing wind resistance and maximum power generation efficiency. The daily power generation is 18% higher than that of conventional carports. Support factory direct supply mode, reduce intermediate costs, and meet the large-scale deployment needs of industrial and commercial parks, logistics hubs, coastal facilities, etc.
| Material |
Carbon Steel/Alumnium Alloy/Stainless Steel |
| Coating |
Spray painting, baking paint/hot-dip galvanizing/anodizing |
| Pile foundation |
Cement pile or hot-dip galvanized steel spiral ground pile |
| Other accessories |
M-shaped zinc aluminum magnesium sink, guide rails, fixtures, screws and nuts, connectors, washers, etc |
| Service life |
15 years |
| Wind Load |
60m/s |
| Snow Load |
1.4KN/M2 |
1. Super strong wind resistance and durability
Wind tunnel optimized structure: triangular truss support+pre buried pile design, certified for international wind resistance, capable of withstanding instantaneous strong winds of 50m/s.
Corrosion resistant galvanized steel: surface hot-dip galvanized treatment (zinc layer ≥ 80 μ m), resistant to salt alkali and dust corrosion, with a service life of over 30 years.
2. Efficient power generation and intelligent adaptation
High quality power generation components: N-type power generation components with a back gain of 15%, maintaining high transparency even in windy environments.
Dynamic tilt angle adjustment: Optional manual/automatic adjustment bracket to adapt to seasonal wind direction changes, increasing annual power generation by 12%.
3. Rapid deployment and flexible expansion
Modular assembly: Standardized components support single row to multi row carport series connection, with single slot installation taking only 6 hours and a 40% reduction in construction period.
Compatible with energy storage and charging stations: Reserve DC fast charging interface, support energy storage system expansion (50kW-2MW), and achieve off grid power supply.
4. Cost advantage and policy adaptation
Factory direct supply mode: eliminates intermediary price differences and reduces total project costs by 25%.
World class certification: Complies with Rohs environmental standards, ISO9001 quality standards, and helps companies apply for green energy subsidies.
Installation and maintenance
Installation process:
1. Foundation construction: Concrete pre buried piles (depth ≥ 1.5 meters) with a tensile strength ≥ 30MPa.
2. Bracket assembly: Bolt fastened galvanized steel truss, no welding required, reducing on-site construction pollution.
3. PV panel fixation: Wind resistant fixtures+waterproof rubber strips for sealing to prevent component detachment and water leakage.
4. Electrical system integration: IP65 protection level inverter and combiner box, supporting remote monitoring and operation.
Maintenance Guide:
1. Quarterly inspection: Clean the surface dust of components, check the tightness of bolts and grounding system.
2. Annual maintenance: Electrical system insulation testing, bracket anti-corrosion coating repair.
Application scenarios
1. Port and logistics park: Provide shading and off grid power for container yards and freight vehicles, reducing dependence on diesel generators.
2. Coastal industrial facilities: high-risk areas such as petrochemical plants and seawater desalination plants, achieve explosion-proof and safe power supply.
3. Desert photovoltaic power station: As a supporting facility for employee parking lots, it simultaneously solves the needs of shading and on-site auxiliary electricity.
4. Highway service area: Integrate charging stations and energy storage systems to create a zero carbon transportation hub.
Company Profile
Our Advantages
Packaging & Shipping
FAQ
1. Q: Does the carport require special maintenance after a sandstorm?
A: No additional processing is required, the nano dust repellent coating can automatically slide off more than 80% of the sand and dust, requiring only regular quarterly cleaning.
2. Q: Does the galvanized steel frame rust in high humidity coastal environments?
A: The hot-dip galvanized layer can resist C5 level corrosive environment and has no structural corrosion risk for 20 years.
3. Q: Does installation require government approval?
A: Provide a complete set of engineering drawings and compliance documents to assist clients in completing local energy management department filings (such as Saudi SEC, UAE DEWA).
4. Q: Does it support extreme low temperature (-30 ºC) environments?
A: The components have passed the IEC 61215 low-temperature cycling test, and the bracket is made of low-temperature impact toughness steel (-40 ºC AKV ≥ 27J).
5. Q: How long is the payback period for project investment?
A: Under the condition of 6.5 hours of daily light exposure in the Middle East, the recovery period under spontaneous self use mode is about 4-6 years.
Audited Supplier 
){kind=link}