Product Description
Introducing our Customized Hot Dipped Galvanized Carbon Steel Snow Proof Single Axis Solar Tracker Bracket, designed for maximum efficiency and durability. This bracket is ISO, CE, and Rohs certified, ensuring top-notch quality and performance. With its single-axis design, it allows for optimal sunlight exposure, increasing the efficiency of your solar panels. The snow-proof feature ensures reliable operation even in harsh weather conditions. Made from high-quality carbon steel and hot-dipped galvanized for corrosion resistance, this bracket is built to last. Easy to install and suitable for residential use, this bracket is a must-have for anyone looking to maximize their solar energy production. Invest in our Single Axis Solar Tracker Bracket today and start harnessing the power of the sun!
Core Parameters.
Material: Q345B carbon steel + hot dip galvanised (zinc layer thickness ≥85μm)
Load capacity: 10 tonnes for single bracket, compatible with double sided modules / 2600mm long modules
Protection: IP68 motor + snow-proof rail (passed IEC 62817 snow load test)
Certifications: ISO 9001, CE, RoHS 2.0, ISO 14001,ISO 45001
Adjustment range: ±45° dynamic tracking + 10°-50° manual tilt adjustment
Key Advantages
1. Personalisation and customisation
Flexible and adjustable parameters.
Support 10+ customised parameters such as load bearing, rail spacing, height above ground, etc. to meet different project requirements.
Provide 3D modelling and simulation services to optimize the layout.
Rapid delivery.
Standardised modules + regional warehousing, customised order delivery cycle is shortened to 6-8 weeks.
2. Extreme Climate Adaptability
Snowproof design.
Adjustable guide rail tilt angle (2°-5°), with snow melting chute design, snow load 6500Pa passes the test.
Passed -30ºC~60ºC temperature cycle test, suitable for cold and tropical regions.
Corrosion resistance.
Hot dip galvanised layer + epoxy resin coating, salt spray test life ≥ 5000 hours (no red rust).
3. Efficient power generation and remote control
Remote tracking algorithm.
Combining meteorological data and module efficiency, the average daily power generation is increased by 35%, and the power consumption in cloudy mode is <0.1kWh/day.
Supports linkage with energy storage system and microgrid for peak shaving and valley filling.
Double-sided module optimisation.
Adjustable height from ground 2m-4m, backside gain up to 25%, compatible with PERC/HJT/Calcite technology.
4. Global Compliance and Environmental Protection
Full coverage of international certifications.
Passed EU CE mechanical safety certification, PV standard and China GB/T 31467.
RoHS 2.0 certification ensures no lead, cadmium, pollution and compliance with REACH regulations.
Sustainable Production.
95% recyclable materials, 30% lower energy consumption, Rohs certified.
Installation & Maintenance Guide
Installation Procedure
Foundation Survey.
Use a total station to ensure that the foundation level error is ≤1°, and that the torque of the helical pile is ≥6000N-m (rock and soil layer).
Bracket assembly.
Tightening torque of main beam bolts 80N-m±5%, mounting error of guide rail≤0.5mm.
System Integration.
Installation of IP68 motor and light sensor, calibration of initial tracking angle (accuracy ±0.3°).
Test wind reset response (wind speed ≥40m/s automatically switch to 25° wind angle, delay <1 second).
Maintenance Recommendations
Monthly inspection.
Clean guide rails from snow/sand accumulation, check coating scratches (localised repair ≤ 5mm).
Tighten bolts with anti-loosening markings, lubricate guide rails (lithium grease NLGI grade 2).
Annual maintenance.
Replace drive bearings (resistant to -40ºC~120ºC grease), update control software.
Use coating thickness gauge to check zinc layer thickness (localised ≥70μm need to be re-coated).
Post-disaster treatment.
Check structural deformation after typhoon/blizzard (laser scanning calibration), reset bracket to safe angle.
Applications
Polar and Frigid Projects: Snowproof design for high latitudes such as Alaska and Scandinavia.
Distributed power generation in industrial areas: chemical plants, steel mills roofs, acid rain, salt spray corrosion resistance.
Large-scale ground-based power plants: Deserts, Gobi and other arid areas, suitable for double-sided modules for agricultural and photovoltaic complementary.
Harbour/Coastal PV: Corrosion-resistant design to withstand sea wind and salt spray, supports off-grid energy storage.
International assistance projects: CE/RoHS certification helps to enter the European, American and Southeast Asian markets.
Company Profile
Our Advantages
Packaging & Shipping
FAQ
Q1: How do you ensure the reliability of the snow protection design?
A: The guide rail is designed with 2° inclination + snow melting groove at the bottom, combined with active heating wire (optional), and the snow load test has passed the IEC 62817 standard.
Q2: Do customised parameters affect lead time?
A: Delivery lead time for standard parameters is 6-8 weeks, complex customisation (e.g. non-standard load bearing) requires additional 2-4 weeks.
Q3: Is the system compatible with different brands of inverters?
A: We support Huawei, SMA, Sunny Power and other mainstream brands, and provide Modbus/RS485 universal interface.
Q4: How to ensure the motor performance in -30ºC environment?
A: The motor adopts wide temperature range design (-40ºC~85ºC) and the lubricant passes ASTM D3336 extreme pressure test.
Q5: How to deal with coating corrosion during the warranty period?
A: We provide free coating repair service, on-site repainting of zinc and aluminium coating, unlimited times during the warranty period.
){kind=link}