Product Description
Our HDG+Painted Manual remote control+remote computer control 1-Axis Solar Tracking Bracket, designed for optimal solar panel positioning to maximize energy efficiency. This bracket features a heavy-duty galvanized (HDG) and painted finish for durability and longevity. With manual remote control and remote computer control capabilities, this bracket offers unmatched convenience and flexibility in adjusting solar panel angles.
| System type |
Independent Drive |
| NO.of Panel |
2-10 Piece(≤23 sq.m.) |
| Power Consumption |
5.0Kwh/set/year |
| Max. wind speed in running |
24 m/s |
| Max. wind speed in fat |
40 m/s |
| Rust protection |
Hot-dipped galvanized/superdyma |
| Azimuth angle tracking range |
±45ºC |
| Elevation angle tracking range |
45ºC |
| Control model |
Time + GPS Control |
| Tracking accuracy |
0.1°-2°(Adjustable) |
| Control tilt angle method |
Manual remote control+remote computer control |
Product advantages
1. Double protective coating
Hot dip galvanizing +epoxy resin coating , passed salt spray test , with a lifespan twice that of a single coating.
Wind resistance level 14 (70m/s), snow load 1.8kN/m ², suitable for extreme temperature differences of -30 ºC~+60 ºC.
2. Dual mode flexible control
Manual mode: Quickly adjust the tilt angle through the hand crank (single person operation, time ≤ 5 minutes).
Remote control: 2.4GHz wireless controller (covering a radius of 100m), suitable for no network environment, supports multi bracket group control.
3. Low maintenance and high compatibility
Non lubricated rotating bearings have a maintenance cycle of ≥ 10 years, and the operation and maintenance costs are 50% lower than traditional single axis systems.
Compatible with double-sided components, tracking inverters, and off grid energy storage systems (such as Tesla Powerwall).
4. High cost-effectiveness and rapid deployment
The cost of carbon steel material is 40% lower than that of aluminum alloy, with a minimum order quantity of 200 sets and a delivery time of ≤ 15 days.
Pre installed modular design, installation takes only 5 days per MW, saving 60% of labor hours.
Installation steps
1. Foundation construction
Spiral piles (sandy/frozen soil) or concrete foundations (depth ≥ 1.2m) with a spacing of 4m (bearing capacity ≥ 50kN).
2. Bracket assembly
Assemble pre galvanized columns and beams, tighten bolts (torque 25-30N · m), and install manual rocker/remote receiver.
3. Component fixation
Fix the photovoltaic panel with a pressure block and test the tilt angle adjustment range (manual/remote control mode switching).
4. System acceptance
Check the integrity of the coating and simulate wind load testing (lateral tension ≥ 30kg).
Company Profile
Our Advantages
Packaging & Shipping
FAQ
Q1: What are the advantages of hot-dip galvanizing (HDG)+epoxy coating?
A: HDG provides basic anti-corrosion and epoxy coating to resist UV and chemical corrosion, with a dual protection life of 25 years, which is twice as long as single galvanizing.
Q2: Is the remote control signal stable in remote areas?
A: Adopting an enhanced 2.4GHz signal (with a coverage radius of 100m), it has strong anti-interference ability and supports repeater expansion (optional accessories).
Q3: Is manual mode laborious?
A: Built in turbo reduction device, with a shaking handle operating torque of ≤ 5N · m, easily adjustable for women or teenagers.
Q4: Minimum Order Quantity (MOQ) and Warranty?
A: MOQ 1 set (approximately 0.08MW), 10-year structural warranty, and 3-year warranty for motors/controllers.
Q5: Can we customize colors or logos?
A: Support customized RAL color cards with epoxy coating and provide laser logo engraving services (MOQ 1 set).
){kind=link}