Hot Dipped Galvanized Painted Single Axis Tracking Adjustable Solar Bracket System

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

JCHX Hot Dipped Galvanized Painted Single Axis Tracking Adjustable Solar Bracket System, designed to optimize the performance of solar panels. This system allows for single-axis tracking, ensuring maximum exposure to sunlight throughout the day. The hot-dipped galvanized and painted finish provides durability and corrosion resistance, making it ideal for outdoor use. The adjustable design allows for easy installation and customization based on site requirements. Our solar bracket system is a reliable and cost-effective solution for mounting solar panels in various settings. Enhance the efficiency of your solar energy system with our high-quality and versatile bracket system.

 

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

Product advantages

1. Double protective coating

Hot dip galvanizing (zinc layer ≥ 80 μ m)+epoxy resin coating (thickness ≥ 60 μ m), passed ISO 9227 salt spray test (3500 hours without corrosion), with a lifespan twice that of a single coating.
Wind resistance level 14 (70m/s), snow load 1.8kN/m ², suitable for extreme temperature differences of -30 ºC~+60 ºC.

2. Dual mode flexible control

Manual mode: Quickly adjust the tilt angle through the hand crank (single person operation, time ≤ 5 minutes).
Remote control: 2.4GHz wireless controller (covering a radius of 100m), suitable for no network environment, supports multi bracket group control.

3. Low maintenance and high compatibility

Non lubricated rotating bearings have a maintenance cycle of ≥ 10 years, and the operation and maintenance costs are 50% lower than traditional single axis systems.
Compatible with double-sided components, tracking inverters, and off grid energy storage systems (such as Tesla Powerwall).

4. High cost-effectiveness and rapid deployment

The cost of carbon steel material is 40% lower than that of aluminum alloy, with a minimum order quantity of 200 sets and a delivery time of ≤ 15 days.
Pre installed modular design, installation takes only 5 days per MW, saving 60% of labor hours.


 

 

Installation steps

1. Foundation construction

Spiral piles (sandy/frozen soil) or concrete foundations (depth ≥ 1.2m) with a spacing of 4m (bearing capacity ≥ 50kN).

2. Bracket assembly

Assemble pre galvanized columns and beams, tighten bolts (torque 25-30N · m), and install manual rocker/remote receiver.

3. Component fixation

Fix the photovoltaic panel with a pressure block and test the tilt angle adjustment range (manual/remote control mode switching).

4. System acceptance

Check the integrity of the coating and simulate wind load testing (lateral tension ≥ 30kg).

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q: What is the difference between galvanized aluminum magnesium steel and ordinary galvanized steel?
A: Aluminum magnesium coating significantly improves corrosion resistance, especially suitable for high salt spray and acid rain areas, with a lifespan extension of more than 50%.

Q: Does the bracket require additional anti-corrosion treatment?
A: No need! The coating and passivation treatment have been completed before leaving the factory, and it can be used directly.

Q: Can you provide a load-bearing calculation report?
A: We can provide third-party inspection reports along with the goods and support customized wind/snow load analysis for the project.

Q: Do you accept sample orders?
A: support! 3 sets minimum order, shipped within 7 days, sample fee can be deducted from bulk order.

Q: Payment method and warranty period?
A: Accept TT/LC, with a 15 year warranty (free replacement for non-human damage).