Wholesale Stainless Steel Adjustable Pitched Roof Solar Brackets

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Wholesale Solar Bracket-01
• Certification: GB, ISO, CE, RoHS
• Application: Home
• Material: Stainless Steel
• Type: Roof Bracket
• Sample: Free
• Design: Free
• Coating: Anodic Oxidation HDG Zn Al Mg Coated
• Parts: Wooden Boxes or Pallets
• Profile: Tied with Steel Strips
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Wholesale Stainless Steel Adjustable pitched roof solar brackets

Introducing our Wholesale Stainless Steel Adjustable pitched roof solar brackets, designed specifically for tile roofs. These high-quality brackets are perfect for securely mounting solar panels on tile roofs, providing a durable and adjustable solution for your solar energy needs. Our Roof Tile Brackets are made of stainless steel, ensuring long-lasting performance and resistance to corrosion. With easy installation and a versatile design, these Solar Tile Roof Brackets are ideal for both residential and commercial applications. Whether you are a homeowner looking to go solar or a business owner seeking to reduce energy costs, our Tile Roof Mounting Brackets for Solar Panels are the perfect choice. Invest in our Tile Roof Solar Mounting Brackets today and start harnessing the power of the sun efficiently and effectively.

Product advantages

1. Ultimate corrosion resistance

Stainless steel selection: optimized for high salt spray environments along the coast, reducing the risk of incision corrosion by 95%
Self repairing oxide layer: The passivation film continuously regenerates in a humid environment, with a maintenance free cycle of up to 10 years


2. Rapid deployment and cost-effectiveness

Pre installed guide rail: The factory completes 90% of the component processing, and only requires snap connections on site (tool requirement: 1 torque wrench)
Lightweight design: reduces weight by 45% compared to traditional steel brackets and lowers transportation costs by 30%

3.Adjustable

Gear angle adjustment device: A single person can complete the tilt angle calibration in 5 minutes, with an error of ≤± 0.5 °.
Four season optimization mode: winter+15 ° to increase low radiation power generation, summer -5 ° to enhance heat dissipation efficiency.

 

 

5-step installation process

1.Roof assessment
Confirm that the load-bearing capacity is ≥ 250kg/m ², measure the slope (error ≤± 2 °)
2.Ballast fixation
Concrete ballast block (density ≥ 2400kg/m ³) or chemical anchor bolt (tensile strength ≥ 30kN)
3.Assembly of guide rails
SnapLock buckle connection pre installed guide rail, torque wrench calibrated to 25Nm
4.Tilt angle adjustment
Adjust the gear device to the recommended angle (refer to the table below)
|Latitude Range | Recommended Tilt Angle|
|----------|----------|
|0 ° -20 ° | Latitude+10 °|
|20 ° -40 ° | Latitude ± 5 °|
|>40 ° | Latitude -10 °|
5.Waterproof testing
0.5MPa air pressure test, continuous for 30 minutes without leakage

1. Coastal industrial plants (case: Guangdong Chemical Plant)

Challenge: Annual average salt spray concentration of 4200mg/m ³, frequent occurrence of typhoons (8 times per year)
Solution: stainless steel body+wind resistant ballast block, zero corrosion fault for 500kW system

2. Renovation of Historical Buildings (Case: Kyoto Temples in Japan)

Challenge: Protection requirements for traditional wooden tile roofs, UNESCO cultural heritage restrictions
Solution: Non penetrating fixture+0.5mm silicone pad, bearing 120kg/m ², certified for cultural heritage protection

3. High latitude snow areas (case: Norwegian wind power plant)

Challenge: Snow load of 3.0kN/m ², extreme night low temperature of -35 ° C
Result: 45 ° inclination layout, 90% snow sliding efficiency, 22% increase in annual power generation

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1:  Do stainless steel brackets require additional anti-corrosion treatment?

A: 316L stainless steel does not require additional treatment in Common environments, while 304 stainless steel is recommended to be coated with a nano anti-corrosion coating every 5 years.

Q2: Minimum order quantity and delivery time?

A: Standard product: Minimum order of 1000Watts, 15 day shipping
Customized version: minimum order of 3000Watts, mold fee consultation with customer manager, delivery time of 25 days

Q3:  Can it be adapted to irregular tiles (such as fish scale tiles)?

A:  Provide 3D scanning customized fixture services and complete the adaptation plan within 3 working days.

Q4: How to verify wind resistance?

A:  Through dynamic wind load testing (60m/s for 10 minutes), the displacement is ≤ 3mm.

Q5: What are the contents of the warranty policy?

A:  12 year structural warranty (material fracture, connection failure).