| Customization: | Available |
|---|---|
| After-sales Service: | 30 Years |
| Warranty: | Steel Structure for 15 Years Solar Modules for 5 Y |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This product is a customized hot-dip galvanized single axis solar tracking bracket system, designed specifically for large ground power stations and industrial and commercial projects. It uses Q355B high-strength steel and hot-dip galvanizing process (zinc layer ≥ 65 μ m), and has passed ISO 1461 and CE certification, with a corrosion resistance life of up to 30 years. Support single axis automatic tracking (± 45 ° tilt adjustment), compatible with double-sided components and complex terrain, increasing power generation by 25% to 35%, suitable for extreme environments such as deserts, coasts, and permafrost.
Product advantages
1. Super strong corrosion resistance
Hot dip galvanizing process: Zinc layer thickness ≥ 150 μ m, passed ISO 9227 salt spray test (5000 hours without red rust), with a lifespan three times longer than ordinary galvanized steel.
Wind resistance level 15 (80m/s), snow load of 2.5kN/m2, suitable for harsh weather conditions such as sandstorms and acid rain.
2. Efficient power generation and intelligent tracking
Single axis tracking system: Real time optimization of component tilt angle through photosensitive sensor+PLC control, resulting in a 30% increase in daily power generation (compared to fixed brackets).
Compatible with double-sided components, adjustable ground clearance of 1.5-3m, utilizing ground reflection to increase revenue.
3. Fully customized design
Support customized length (single row ≤ 200m), column spacing (4-8m), and driving mode (electric/hydraulic).
Suitable for inclined terrain with a slope of ≤ 25%, optional sand, snow, and earthquake resistant accessories.
4. Rapid deployment and low-cost operation and maintenance
Pre installed modular structure, installation only takes 5-7 days per MW, saving 40% of labor costs.
Maintenance free bearings: The operation and maintenance cycle has been extended to 10 years, and the LCOE (levelized cost of electricity) has been reduced to $0.015/kWh.
| System type | Independent Drive |
| NO.of Panel | 2-10 Piece(≤23 sq.m.) |
| Power Consumption | 5.0Kwh/set/year |
| Max. wind speed in running | 24 m/s |
| Max. wind speed in fat | 40 m/s |
| Rust protection | Hot-dipped galvanized/superdyma |
| Azimuth angle tracking range | ±45ºC |
| Elevation angle tracking range | 45ºC |
| Control model | Time + GPS Control |
| Tracking accuracy | 0.1°-2°(Adjustable) |
){kind=link}