Factory Directly Supply Hot Dipped Galvanized Single Axis Solar Racking System

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

Factory direct hot-dip galvanised single-axis solar tracking racking system, designed for cost-effective PV projects, adopts hot-dip galvanised anti-corrosion technology (zinc layer thickness ≥85μm) and modular structure, suitable for ground power stations, industrial and commercial rooftops, and complex terrain. With intelligent single-axis tracking technology (±45° dynamic adjustment), the system improves power generation efficiency by 25%-35%, combines durability and economy, and supports the rapid delivery of 100 MW projects.
 

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

Core Advantages
1. Advantage of factory direct supply

Zero middleman premium: direct purchase from factories, prices are 15%-20% lower than market prices.
Fast delivery: standardised production + regional warehousing, order delivery cycle is shortened to 4-6 weeks (including transportation).
Full quality control: ISO 9001 certified, full traceability from raw materials to finished products, support third-party factory inspection.
2. Excellent anti-corrosion performance

Hot-dip galvanised base material (in accordance with ISO standards): uniform zinc layer coverage, passed 3000 hours salt spray test (no red rust), corrosion-resistant life ≥ 30 years.
C5M anti-corrosion grade: suitable for coastal, industrial pollution and high humidity environment (pH 2-12).
3. High load bearing and stability

High-strength steel main beam: wind load resistance up to 65m/s (Class 15 typhoon), snow load 6000Pa, IEC 62817 structural certification.
Single Bearing Weight Design: Single set of brackets with a load capacity of 7 tonnes, compatible with double-sided modules, 210mm oversize and PERC/HJT technology.
4. Intelligent tracking and efficient power generation

Remote computer control: average daily power generation is increased by more than 30%, and the cloudy day mode is automatically switched to fixed tilt angle energy saving mode.
Double-sided module optimisation: adjustable height from 1.5m-3.5m above the ground, backside power generation gain increased by 15%-20%.
5. Low-cost operation and maintenance

Modular design: 50% less on-site welding, suitable for helical pile, concrete and ballast foundation, daily installation capacity ≥ 8MW.
Self-lubricating bearings + hydrophobic coating: annual maintenance cost <0.5% of power generation gain, automatic reset to safe angle after disaster.

Installation and Maintenance Guide
Installation steps

Foundation construction: Select pile foundation according to load requirements (recommended helical pile torque ≥4500N-m), horizontal error ≤1.5°.
Bracket assembly:
Main beam and column bolt fastening torque 70N-m±5%, guide rail spacing adapted to component border (error ±1mm).
System integration:
Installation of IP68 protection motor, connection of light sensor and PLC controller, calibration of tracking zero point (accuracy ± 0.5 °).
Test high wind reset response (wind speed ≥18m/s automatically switch to 25° wind angle, delay <2 seconds).
Maintenance Recommendations

Monthly inspection: clean track debris, check bolt anti-loosening marks, coating integrity (use coating thickness gauge).
Annual maintenance: lubricate bearings (high temperature resistant lithium grease), update control software, test earthing resistance (≤4Ω).
Post-disaster treatment: forced reset of brackets after typhoon/sandstorm, check structural deformation and electrical connections.

 

 

Typical Application Scenarios
Large-scale ground power station: desert, Gobi, mudflats and other GW-level centralised PV projects.
Industrial and commercial rooftops: distributed power generation in factories, warehouses and commercial complexes, suitable for tilted roofs.
Agricultural photovoltaic complementary system: adjustable height of the support (2m-4m), compatible with crop cultivation and photovoltaic power generation.
Coastal PV: Salt spray resistant design, suitable for harbours, islands and tidal zones.
Off-grid energy storage projects: paired with lithium battery systems to provide 24-hour stable power supply to remote areas.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1: How to ensure the quality of factory direct supply?
A: All products are ISO 9001 certified, with full video monitoring of the production process and support for customer supervision and customised quality inspection in the factory.

Q2: How does hot dip galvanising perform in extreme weather?
A: The zinc layer can maintain ≥25μm thickness in acid rain (pH 3-5) and salt spray (Cl- concentration 5%) environments, with a lifespan of ≥30 years.

Q3: Does it support double-glass modules and tracking linkage?
A: Fully compatible! The track spacing can be adjusted to 30-60mm, with a ventilation gap reserved on the back to maximise the double-sided rate.

Q4: What is the delivery cycle for 100MW projects?
A: Standardised production + regional warehousing, 100MW projects only take 8-12 weeks from order to grid connection (including foundation construction).

Q5: What are the warranty and after-sales service terms?
A: We provide 10-year warranty on main structure, 5-year warranty on drive system, 72-hour global emergency response, and lifelong free technical support.