Manual Remote Control Rotatable Carbon Steel Painted+HDG Single Axis Solar Bracket

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel + Painted
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

 Manual remote control rotatable Carbon Steel Painted+HDG Single Axis Solar Bracket

This product is a manual and remote control dual-mode rotating single axis solar bracket, using Q235B carbon steel substrate+hot-dip galvanized (HDG)+epoxy coating for dual protection, certified by ISO and CE, with a corrosion resistance life of ≥ 25 years. Support ± 45 ° tilt angle adjustment, suitable for high corrosion or remote areas such as deserts and coasts, compatible with double-sided components (≤ 600W), providing flexible manual/remote control operation, suitable for industrial and agricultural photovoltaic projects without grid coverage or requiring dynamic adjustment.

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Product Control Mode	Manual + remote control

Product advantages

1.Double protective coating

Hot dip galvanizing +epoxy resin coating , passed ISO salt spray test , with a lifespan twice that of a single coating.
Wind resistance level 14 (70m/s), snow load 1.8kN/m ², suitable for extreme temperature differences of -30 ºC~+60 ºC.
2.Dual mode flexible control

Manual mode: Quickly adjust the tilt angle through the hand crank (single person operation, time ≤ 5 minutes).
Remote control: 2.4GHz wireless controller (covering a radius of 100m), suitable for no network environment, supports multi bracket group control.

3.Low maintenance and high compatibility

Non lubricated rotating bearings have a maintenance cycle of ≥ 10 years, and the operation and maintenance costs are 50% lower than traditional single axis systems.
Compatible with double-sided components, tracking inverters, and off grid energy storage systems (such as Tesla Powerwall).

4.High cost-effectiveness and rapid deployment

The cost of carbon steel material is 40% lower than that of aluminum alloy, with a minimum order quantity of 1 set and a delivery time of ≤ 15 days.
Pre installed modular design, installation takes only 5 days per MW, saving 60% of labor hours.
 

Installation steps

1. Foundation construction

Spiral piles (sandy/frozen soil) or concrete foundations (depth ≥ 1.2m) with a spacing of 4m (bearing capacity ≥ 50kN).

2. Bracket assembly

Assemble pre galvanized columns and beams, tighten bolts (torque 25-30N · m), and install manual rocker/remote receiver.

3. Component fixation

Fix the photovoltaic panel with a pressure block and test the tilt angle adjustment range (manual/remote control mode switching).

4. System acceptance

Check the integrity of the coating and simulate wind load testing (lateral tension ≥ 30kg).


 Application Cases

 

Project	Achievements
Off grid power station in Sahara, Egypt (20MW)	Manually adjusting to cope with sandstorms has increased annual power generation by 28% and reduced operation and maintenance costs by 55%.
Brazilian Rainforest Agriculture Photovoltaic (5MW)	Remote group control management of 1000+supports, optimized rainy season tilt angle to reduce water accumulation, and increased land use efficiency by 180%.
Off grid system in Qinghai pastoral area, China (2MW)	Double coating anti UV aging, remote control response time ≤ 3 seconds at -30 ºC low temperature, reducing electricity costs for herdsmen to 0.

 

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1:  What are the advantages of hot-dip galvanizing (HDG)+epoxy coating?

A: HDG provides basic anti-corrosion and epoxy coating to resist UV and chemical corrosion, with a dual protection life of 25 years, which is twice as long as single galvanizing.

Q2:  Is the remote control signal stable in remote areas?

A:  Adopting an enhanced 2.4GHz signal (with a coverage radius of 100m), it has strong anti-interference ability and supports repeater expansion (optional accessories).

Q3:  Is manual mode laborious?

A:  Built in turbo reduction device, with a shaking handle operating torque of ≤ 5N · m, easily adjustable for women or teenagers.

Q4:  Minimum Order Quantity (MOQ) and Warranty?

A: MOQ 200 sets (approximately 0.08MW), 10-year structural warranty, and 3-year warranty for motors/controllers.

Q5:  Can we customize colors or logos?

A:  Support customized RAL color cards with epoxy coating and provide laser logo engraving services (MOQ 1 set).