| Customization: | Available |
|---|---|
| After-sales Service: | 30 Years |
| Warranty: | Steel Structure for 15 Years Solar Modules for 5 Y |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
All-weather corrosion-resistant aluminum rooftop PV racking - factory direct, zero-penetration installation, suitable for all roof types
Designed for residential, commercial and industrial rooftops, the solar PV racking system adopts 6063-T5 aerospace-grade aluminum alloy body (tensile strength ≥ 276MPa) with Patented non-penetrating buckle technology, through the RoHS certification (lead, cadmium and other 10 harmful substances test), suitable for metal tile It is suitable for metal tiles, asphalt shingles, concrete tiles and color steel roofs. It supports wide temperature range from -40°C to +75°C, with a single load capacity of 120kg, tilt angle adjustment range of 0°-40°, and a lifespan of more than 25 years. °, life expectancy of more than 25 years, installation time reduced to 1/3 of traditional solutions. The installation time is reduced to 1/3 of the traditional solution.
Product advantages
1. Factory direct supply - 30% direct cost reduction
De-intermediated supply chain: own factory Production (annual production capacity of 12GW), eliminating dealers and supporting batch customization (minimum order quantity of 1000watts).
Fast delivery: 7 days for standard products, 15 days for customized orders.
2. Super corrosion resistance - 50% longer life span
anodized self-repairing layer : Surface treatment thickness ≥25μm, salt spray test ≥2,000 hours.
3. 5-minute Extreme Installation - Newbie Friendly
Patented SnapLock Clip : No tools required, single person can complete single set installation in 10 minutes (30 minutes for traditional solutions).
Online remote technology-assisted installation: animated instructions, real-time calibration of tilt and level.
4. Green and environmental protection - low carbon in the whole life cycle
95% material recycling rate Aluminum alloy frame supports unlimited melting and regeneration, reducing production energy consumption by 40%.
Zero Roof Damage: Non-penetrating design retains the integrity of the roof waterproofing layer, ISO14001/Rohs green certification.
Installation steps
Minimalist 3-step process
Roof assessment
Confirm roof load ≥ 120kg/m² and measure available space.
Guide rail positioning
Arrange a set of guide rails every 0.8m along the ridge of the roof, using negative pressure adsorption bases (no drilling required).
Module fixing
Quick release clips to connect PV panel frames, torque wrench calibrated to 10Nm.
Application Scenarios
1. Residential flat roof conversion (Case: Sydney Suburbs)
Challenge Insufficient load-bearing of old metal roofs (≤100kg/m²)
Solution: 0° inclination layout, only 78kg/m² increase in roof load, 18% increase in annual power generation. Increase 18%
2. Industrial plant (Case: Shanghai Logistics Center)
Challenge: Color steel tile roof (0.6mm thickness), average annual typhoon ≥ 6 times
Result: wind-resistant ballast block + waterproof sealing system, 1MW system with zero leakage record
3. Historic Architectural Conservation (Case: Paris Museum)
Challenge: Limestone roof is structurally weak and penetration installation is prohibited Solution: Non-contact negative pressure adsorption bracket, certified for heritage restoration
Q1: Can the bracket withstand extreme weather (e.g. hail, typhoon)?
A: Through dynamic wind load test (45m/s for 15 minutes) and hail impact test (25mm diameter hail, speed 90km/h) with no structural deformation.
Q2: Do I need specialized personnel for installation?
A: No! The installation can be carried out by one person with the help of a remote installation guide on the supporting technology line.
Q3: What is the minimum roof space requirement?
A: Each kW system requires ≥0.3m x 0.8m of vertical space, and the recommended roof slope is ≤15°.
Q4: How do I verify RoHS compliance?
A: Provide test reports covering 10 hazardous substances such as lead, cadmium, and so on.
Q5: Is maintenance costly?
A: Clip tightness is checked every six months, and annual maintenance only requires cleaning of the guide rails for dust accumulation. The whole life cycle maintenance cost is 50% less than steel bracket.
){kind=link}