Product Description
Zinc aluminum magnesium coated ISO/ CE/Rohs certified Single Axis Solar Tracker Bracket
Our Single Axis Solar Tracker Bracket is easy to install and designed for maximum efficiency in solar energy production. The kit includes all necessary components for a seamless installation process. With its innovative design, this bracket allows for optimal solar panel positioning, maximizing energy output.
| System type |
Independent Drive |
| NO.of Panel |
2-10 Piece(≤23 sq.m.) |
| Power Consumption |
5.0Kwh/set/year |
| Max. wind speed in running |
24 m/s |
| Max. wind speed in fat |
40 m/s |
| Rust protection |
Hot-dipped galvanized/superdyma |
| Azimuth angle tracking range |
±45ºC |
| Elevation angle tracking range |
45ºC |
| Control model |
Time + GPS Control |
| Tracking accuracy |
0.1°-2°(Adjustable) |
| Control tilt angle method |
Manual remote control+remote computer control |
Core Advantages
1. Industrial aesthetics
Customised baking paint process.
Provide 6 standard colours (deep sky grey/titanium blue/desert gold, etc.) and support Pantone colour code customization to meet the needs of architectural aesthetics.
Matte surface treatment process, reflectivity ≤ 5%, to avoid light pollution and enhance the light transmission rate of the module.
2. Structure optimised sunlight capture
Bionic Light Guide Channel Design.
The integrated light guide trough (Patent No. XX-XXXX) at the top of the main beam concentrates scattered light into the module through secondary reflection, increasing the average daily power generation by an additional 5%-8%.
Adjustable height above ground.
Supports 1.5m-4m height adjustment, adapting to the sun trajectory in different latitudes, with backside power generation gain of up to 25%.
3. Super anti-corrosion performance
Triple coating system.
Hot dip galvanising layer (zinc layer thickness ≥85μm, salt spray test ≥8000 hours)
Epoxy primer (acid and alkali corrosion resistant, pH 2-12 environmentally stable)
Fluorocarbon top coat (UV aging resistance, service life ≥30 years)
C5M anti-corrosion grade: Specially designed for coastal, chemical parks and highly polluted environments.
4. Intelligent and efficient operation and maintenance
AI Light Sensing Tracking Algorithm.
Combined with meteorological satellite data to dynamically adjust the angle, power consumption <0.1kWh/day in cloudy mode, support remote monitoring and fault warning.
Modular pre-fabricated design.
Factory pre-installation rate of 95%, on-site assembly only requires fastening bolts (torque 50N-m±5%), daily installation volume ≥15MW.
Annual maintenance cost <0.3% of power generation revenue, free coating repair service provided.
5. Wide compatibility
Supports PERC/HJT/Calcium-Titanium modules, with adjustable rail spacing of 30-80mm, compatible with Huawei, SMA and other mainstream inverters.
Installation and Maintenance Guide
Installation steps:
Foundation survey:
Use geological radar to detect the stability of the foundation, and the torque of the spiral pile should be ≥ 8000N · m (for sandy soil foundation).
The verticality error of the embedded bolts on the base is ≤ 1 °.
Main beam assembly:
Insert the prefabricated main beam into the base sleeve and tighten the bolts with a torque of 150N · m ± 10%.
Calibration level error (laser rangefinder ≤ 2mm).
Component installation:
Install the guide rail and photovoltaic panel, ensuring that the distance error between the module frame and the guide rail is ≤ 1mm.
System debugging:
Connect the PLC controller and calibrate the initial tilt angle and tracking sensitivity (accuracy ± 0.5 °).
Maintenance suggestion:
Monthly inspection:
Check the anti loosening marks on the bolts, clean the dust accumulation on the guide rail (high-pressure air gun), and lubricate the guide rail (NLGI grade 2 silicone grease).
Annual maintenance:
Replace the drive bearing (lubricating grease resistant to -40 ºC~120 ºC) and update the control software.
Use a coating thickness gauge to measure the thickness of the zinc layer (locally ≥ 70 μ m requires additional coating).
Typical application scenarios
Commercial complex roof:
High aesthetic coating is suitable for office buildings and shopping mall roofs, enhancing the overall image of the building and increasing daily power generation by 40%.
Photovoltaic Demonstration Project:
The biomimetic light guide groove design attracts the attention of the government and investors, and helps to apply for green energy subsidies.
Photovoltaic in Chemical Industrial Park:
C5M anti-corrosion grade is resistant to acid and alkali gas corrosion, suitable for complex environments on chemical plant roofs.
High end residential photovoltaic:
Deep space gray/titanium blue color scheme, integrated with building facades, providing customized solutions for villa and apartment roofs.
Company Profile
Our Advantages
Packaging & Shipping
FAQ
Q1: How can the painting process ensure long-term corrosion resistance?
A: Adopting a triple system of hot-dip galvanizing, epoxy primer, and fluorocarbon topcoat, laboratory tests have shown that the salt spray life is ≥ 50 years, and the environment is stable with acid and alkali resistance pH 2-12.
Q2: How can biomimetic light guide slots improve power generation efficiency?
A: By focusing scattered light onto the component through secondary reflection, it has been measured that the daily power generation can be increased by an additional 5% -8%, especially in cloudy weather where the effect is significant.
Q3: Does the system support the renovation of old buildings?
A: support! Modular design suitable for sloping roofs (slope ≤ 30 °), providing customized base solutions, reducing installation space by 30%.
Q4: What is the delivery cycle for a hundred megawatt level project?
A: Standardized prefabrication+regional warehousing, the 100MW project only takes 12-16 weeks from order placement to grid connection.
Q5: How to deal with coating peeling during the warranty period?
A: Free coating repair service, on-site customized paint spraying, unlimited number of times within the warranty period.
){kind=link}