Jchx All-Inclusive Solar Panel Mounting Kit for Flat Roof

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: roof bracket-002
• Certification: GB, ISO, CE, RoHS
• Application: Home
• Material: Steel
• Type: Roof Bracket
• Sample: Free
• Design: Free
• Coating: Hot DIP Galvanized /Zn Al Mg Coated
• Parts: Wooden Boxes or Pallets
• Profile: Tied with Steel Strips
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

JCHX All-Inclusive Solar Panel Mounting Kit for Flat Roof

The JCHX All-Inclusive Solar Panel Mounting Kit is engineered for flat roofs (commercial, industrial, and residential), combining aluminum alloy rails, ballast weights, and adjustable tilt brackets into a single comprehensive package. Designed to meet AS/NZS 1170 and IEC 61215 standards, this system supports 0°-30° tilt adjustments, withstands 60m/s wind speeds (17+ typhoon winds), and handles 2.5kN/m² snow loads. With pre-assembled components and tool-free assembly, installation efficiency is boosted by 60% compared to traditional systems.

 

Technical Parameters
System Name	Solar Slate Roof Mounting System	Certificates	ISO14001/45001/9001,CE,Rohs,GB,etc.
Installation Site	Slate Roof/Metal Roof,etc	Solar Rail	HDG Steel
Tilt Angle	5-45°	Parts List	Guide rails, connectors, hooks, washers, nuts, bolts, triangles, U-shaped embedded parts, etc.
Wind Load	60m/s	Material	SUS304/Q235B/AL6005,etc.
Snow Load	2.0KN/M^2	MOQ	1000 Watts.
Applicable Solar Module	Framed or Frameless	Small Components	AL6005-T5(Anodized)
Panel Layout	Portrait or Landscape	Warranty	10-year warranty

Product advantages

1. Ultimate Durability
 

Zinc-Aluminum-Mg Coated Aluminum: 3000+ hours salt spray resistance (C5-M environments), self-healing coating prevents corrosion .

Stainless Steel Hardware: Resists chlorine corrosion (ideal for coastal areas), tensile strength ≥520MPa.
 

2. Wind & Snow Safety
 

Dynamic Ballast System: Adjustable concrete blocks (≥15kg/m²) ensure stability under extreme winds.

Tilt Angle Optimization: Maximize energy yield by aligning panels with seasonal sun paths.
 

3. Simplified Installation
 

No-Drill Design: Uses weight-based anchoring (no roof penetration), preserving roof integrity .

Pre-Calibrated Components: Pre-assembled rails and brackets reduce on-site work by 70%.
 

4. Cost Efficiency
 

Lifetime Warranty: 10-year structural guarantee, 25-year performance warranty.

Low Maintenance: Aluminum's oxidation layer eliminates annual rust-proofing costs.

 

Installation Steps

Step 1: Roof Assessment

• Verify roof load capacity (≥200kg/m² for ballast systems).
• Measure roof dimensions and plan panel layout (tool: laser level).

Step 2: Ballast Placement

• Position concrete blocks (≥15kg/m²) at 2m intervals along the roof edge.
• Use non-slip mats to prevent displacement.

Step 3: Rail Assembly

• Snap-lock rails into pre-installed brackets (no tools required).
• Secure rails with tamper-proof bolts.

Step 4: Panel Mounting

• Attach panels to rails using clamps (adjust tilt angle via sliding brackets).
• Ensure 30mm gaps between panels for thermal expansion.

Step 5: Final Safety Check

• Inspect all connections for tightness.
• Verify tilt angle with a digital inclinometer (±0.5° accuracy).

Application Scenarios

1. Commercial Rooftops

• Case: 500kW system on a logistics warehouse (Shanghai).
• Solution: Ballast system + 25° tilt, annual energy yield: 620,000 kWh.

2. Industrial Facilities

• Case: Solar farm on a chemical plant (Guangdong).
• Solution: Corrosion-resistant brackets, zero roof penetration.

3. Agricultural Buildings

• Case: Dairy farm in New Zealand.
• Solution: Adjustable tilt for seasonal shading avoidance.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1: Does this kit work on all flat roofs?

A: Compatible with concrete, metal, and membrane roofs (≥15° slope). Requires roof load capacity ≥200kg/m².

Q2: How long does installation take?

A: 8-12 hours for 100m² (2-3 workers), including electrical connections.

Q3: Can I adjust the tilt angle later?

A: Yes! Sliding brackets allow ±5° adjustments without tools.

Q4: Warranty coverage?

A:

• 10 years: Structural failure, bracket corrosion.
• 25 years: Power output guarantee (≥80% efficiency).

Q5: Does it work in high-wind areas?

A: Passed TÜV Rheinland 60m/s wind tests. For zones above 60m/s, add extra ballast (sold separately).

Q6: Minimum order quantity?

A: 50kW system (≈200 panels) for standard kits. Custom orders require 30% deposit.