Product Description
Factory directly supply Zinc aluminum magnesium coated Solar panel mounting Single Axis Tracking Bracket
Single-axis solar tracking mount | Single-axis solar tracking mount | Factory Direct
High-performance single-axis solar tracking racking system tailored for global customers, with zinc-aluminium-magnesium composite coating technology (zinc layer thickness ≥85μm + magnesium-aluminium protective layer), ISO/CE/RoHS certified, and adapted to extreme climates and complex terrains. The system supports modular rapid deployment, increases average daily power generation by 30%-40%, and provides a 25-year warranty on the main structure, helping customers achieve efficient clean energy transformation.
Core Parameters.
Material: Q345B carbon steel + zinc-aluminium-magnesium composite coating (ISO 1461)
Load capacity: 10 tonnes for single set, compatible with double sided modules/2600mm long modules
Protection: IP68 motor + corrosion-resistant guide rails
Adjustment range: ±45° dynamic tracking + 10°-50° manual tilt adjustment
Key Advantages
1. Excellent corrosion protection
Triple protective coating.
Hot dip galvanised base material (zinc layer uniformity ≥95%), passed 5000 hours salt spray test (no red rust).
Magnesium-aluminium composite protective layer: acid and alkali resistant (pH 2-12), anti-UV aging, life extension to more than 35 years.
C5M Anti-corrosion Grade: Specially designed for coastal, chemical plants, high humidity environment, suitable for sandy, rocky and other complex terrain.
2. High-efficiency power generation and intelligent control
AI Light Sensor Tracking:
Combined with weather data to dynamically adjust the angle (±45°), the average daily power generation is increased by 35%, and the power consumption in cloudy mode is <0.1kWh/day.
Supports linkage with energy storage system to achieve peak shaving and valley filling.
Dual-sided module optimisation: adjustable height from 2m-4m above ground, backside gain up to 25%, compatible with PERC/HJT/Calcite technology.
3. Factory direct supply and fast delivery
Standardised module production: 95% factory pre-installation rate, customised order delivery cycle shortened to 6-8 weeks.
Regional Warehousing Network: Supporting global logistics (including customs clearance service), 100MW project only takes 10-14 weeks from order to grid connection.
4. Environmental Protection and Sustainability
98% recyclable materials: 40% less energy consumption than traditional processes, EPD certified.
Carbon Footprint Tracking: Provide full life cycle carbon neutral report, compliant with EU REACH regulation.
Installation & Maintenance Guide
Installation Procedure
Foundation Survey.
Use a total station to ensure that the foundation level error is ≤1°, and that the torque of the helical pile is ≥6000N-m (rock and soil layer).
Bracket assembly.
Tightening torque of main beam bolts 80N-m±5%, mounting error of guide rail≤0.5mm.
System Integration.
Installation of IP68 motor and light sensor, calibration of initial tracking angle (accuracy ±0.3°).
Test wind reset response (wind speed ≥40m/s automatically switch to 25° wind angle, delay <1 second).
Maintenance Recommendations
Monthly inspection.
Clean guide rails from snow/sand accumulation, check coating scratches (localised repair ≤ 5mm).
Tighten bolts with anti-loosening markings, lubricate guide rails (lithium grease NLGI grade 2).
Annual maintenance.
Replace drive bearings (resistant to -40ºC~120ºC grease), update control software.
Use coating thickness gauge to check zinc layer thickness (localised ≥70μm need to be re-coated).
Post-disaster treatment.
Check structural deformation after typhoon/blizzard (laser scanning calibration), reset bracket to safe angle.
Applications
Large-scale ground power station: desert, Gobi and other arid areas, suitable for double-sided modules for agricultural and photovoltaic complementary.
Distributed power generation in industrial areas: chemical plants, steel mills roofs, acid rain and salt spray corrosion resistant.
Polar and Frigid Zone Projects: Snow-proof design for high latitude areas such as Alaska and Northern Europe.
Harbour/Coastal PV: Corrosion-resistant design resists sea wind and salt spray, supports off-grid energy storage.
International projects: CE/RoHS certification helps to enter the European, American and Southeast Asian markets.
Company Profile
Our Advantages
Packaging & Shipping
FAQ
Q1: What are the advantages of zinc-aluminium-magnesium coating over regular galvanising?
A: The magnesium-aluminium layer forms a dense oxide film, which increases corrosion resistance by 4 times, and has a salt spray test life of 5,000 hours (compared to 2,000 hours for normal galvanising).
Q2: Does the system support different brands of inverters?
A: It supports mainstream brands such as Huawei, SMA, and Sunny Power, and provides Modbus/RS485 universal interface.
Q3: How to ensure the motor performance in -30ºC environment?
A: The motor adopts a wide temperature range design (-40ºC~85ºC), and the lubricant passes the ASTM D3336 extreme pressure test.
Q4: What is the delivery cycle for 100MW projects?
A: Standardised production + regional warehousing, 100MW projects only take 10-14 weeks from order to grid connection (including foundation construction).
Q5: How to deal with coating corrosion during the warranty period?
A: We provide free coating repair service, on-site repainting of zinc and aluminium coating, unlimited times during the warranty period.
){kind=link}