Heavy-Duty Steel Frame Solar Tracker for Residential Use

• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Certification: GB, ISO, CE, RoHS
• Model NO.: Single-axis Bracket-005
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°℃ ~ +75℃
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

Durable Steel Frame Residential Single Axis Solar Tracker System

Our Residential Single Axis Solar Tracker System is easy to install and provides optimal sun exposure throughout the day, maximizing energy output. The single-axis design allows for efficient tracking of the sun's movement, increasing energy production by up to 25% compared to fixed solar panels.
 

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

 

 

Installation & Maintenance

 

Installation Steps

 

1.Site Preparation:

Clear debris, level ground, or reinforce rooftop.

Anchor with concrete footings or roof-mounted brackets (included).

2.Frame Assembly:

Bolt pre-assembled sections following numbered guides (1-2 hours).

3.Panel & Motor Setup:

Attach solar panels to tracking rails, connect motor/controller, and align sensors southward.

4.System Calibration:

Use the mobile app to test tracking accuracy and set tilt presets.

 

Maintenance Tips

 

Monthly: Clean panels and check bolt tightness.

Seasonal: Lubricate motor gears (grease included) and reset tilt angle for winter/summer.

Post-Storm: Inspect for structural damage and recalibrate tracking alignment.

 

Application

1. Residential Rooftops: Maximize energy output on limited roof space.
2. Backyard Solar Farms: Ground-mounted setups for off-grid homes or energy independence.
3. Cabins & Tiny Homes: Lightweight yet sturdy design for remote or mobile installations.
4. Pool Heating & EV Charging: Pair with solar thermal panels or EV chargers for 24/7 green energy.
5. Storm-Prone Areas: Reinforced steel structure withstands hurricanes and heavy snow loads.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1: How much space do I need for installation?
A: Minimum 10m² for ground mounts. Roof installations depend on panel size (custom kits available).

Q2: Can I install it myself?
A: Yes! The modular design and step-by-step manual enable DIY installation. Professional help is optional.

Q3: Does it work during cloudy days?
A: Yes! The system uses GPS-based algorithms to estimate sun position even in low light.

Q4: What if the motor fails?
A: Switch to manual mode via the hand crank (included) while awaiting repairs.

Q5: Is it compatible with my existing solar panels?
A: Fits most residential panels (max 2.2m x 1.1m per panel). Contact us for custom sizing.

Q6: How much power does the tracker consume?
A: Only 5-10W daily-less than 1% of the energy it generates!

Q7: What's the ROI period?
A: 4-7 years, depending on local electricity rates and solar incentives.