Desert Horizontal Tilted Single-Axis Solar Tracker (HTSAT) Bracket

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Single-axis Bracket-005
• Certification: GB, ISO, CE, RoHS
• Application: Commercial
• Material: Steel
• Type: Ground Bracket
• System Type: 2~5rows Linked Type/Independent Type
• Motor: DC24vgear Motor/1.5ax1 (DC24V/1.5A×1)
• Max.Wind Speed in Operation(: 24m/S
• Max. Wind Speed in Horizontal Position: 37m/S
• Rust Protection: Hot-Dipped Galvanized Steel
• Operationtemperature: -40°ºC ~ +75ºC
• Controlmodel: Astronomical Algorithms+ Tilt Sensorcloseloop Cont
• Trackingaccuracy: ≤2°(Configurable)
• Backtracking: Yes
• Wind/Snow Protection/Rain: Yes
• Ipprotection: IP66
• Land Area(1 mm): 12500~20000m²
• Profile: Tied with Steel Strips
• Parts: Wooden Boxes or Pallets
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

System type	Independent Drive
NO.of Panel	2-10 Piece(≤23 sq.m.)
Power Consumption	5.0Kwh/set/year
Max. wind speed in running	24 m/s
Max. wind speed in fat	40 m/s
Rust protection	Hot-dipped galvanized/superdyma
Azimuth angle tracking range	±45ºC
Elevation angle tracking range	45ºC
Control model	Time + GPS Control
Tracking accuracy	0.1°-2°(Adjustable)
Control tilt angle method	Manual remote control+remote computer control

Desert Horizontal Tilted Single-Axis Solar Tracker (HTSAT) Bracket

Product advantages

Extreme environmental adaptability

High temperature and dust resistance: Made of high-strength galvanized steel and UV resistant coating, it can withstand desert high temperatures (-30 ° C to+80 ° C) and frequent sandstorms, avoiding component jamming or wear.
Anti corrosion design: surface hot-dip galvanizing+nano coating, resistant to metal fatigue caused by salt alkali land, strong ultraviolet radiation, and temperature difference between day and night.
Efficient power generation performance

Tilt single axis tracking: Combining horizontal axis with tilt angle adjustment (0 ° -30 °), accurately tracking the east-west trajectory of the sun, increasing power generation in desert areas by 20% -35%.
Intelligent light compensation: Built in anti dust light sensor, automatically filters out dust interference, and maintains efficient tracking even in cloudy/dusty weather.
Low maintenance and high reliability

Sealed drive system: motor and gearbox are IP68 protected to prevent sand particles from entering and reduce maintenance frequency.
Modular rapid replacement: Key components such as bearings and controllers support independent disassembly, reducing maintenance costs.
Low cost construction

Lightweight structure: Pre installed frame design reduces the difficulty of desert transportation and installation, saving 30% of construction time in foundation construction.
Adaptive terrain: Adjustable pile depth, suitable for soft sand or rock formations, without the need for complex foundation reinforcement.

Installation and Maintenance Guide
Installation steps
Site preparation:
Clean up the loose sand layer, compact the installation area, and embed spiral ground piles (depth ≥ 1.5 meters) or concrete anchor bolts in advance.
Bracket assembly:
Assemble the crossbeam, column, and tilt angle adjustment mechanism according to the module, and calibrate the levelness twice after pre tightening the bolts (with an error of less than 1.5 °).
Drive system integration:
Install sealed motor and gearbox, connect anti dust light sensing/GPS dual-mode controller, and configure windproof mode (tilt angle reset to zero).
System integration debugging:
Test tracking sensitivity (angle error ± 0.5 °), motor load capacity, and calibrate sand and dust filtration algorithm.
Maintenance points
Daily maintenance:
Clean the sand accumulation on the guide rail and motor casing every month, and check the aging condition of the seals.
Lubricate the bearings quarterly (using high-temperature resistant grease) and test the accuracy of the tilt angle sensor.
Seasonal maintenance:
Clean the surface of photovoltaic panels comprehensively after the sandstorm season and check the reliability of electrical grounding.
Upgrade controller firmware before winter low temperature and optimize battery power supply logic (antifreeze mode).
Emergency response:
After encountering a super sandstorm, manually reset the bracket to a safe tilt angle and check if the gearbox is stuck.
Safety regulations
Avoid high temperature periods during installation (recommended for early morning/evening work), wear sand proof goggles and gloves.
Activate the lightning protection module and disconnect the power supply of the controller before thunderstorm weather.

 

 

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

1.How much does the HTSAT bracket improve power generation efficiency in the desert?

A: Compared to fixed brackets, the daily power generation increases by 20% -35%, and the peak efficiency at noon in summer can reach 40%.

2.Can sandstorms cause tracking failures?

A: Adopting dual signal redundancy of "light sensing+GPS", the light sensing automatically switches to GPS timing tracking when covered by dust, ensuring continuous operation.

3. Do you need to clean the photovoltaic panels frequently?

A: The tilt angle of the bracket design can be adjusted to 45 ° (self-cleaning mode), utilizing gravity to slide most of the accumulated sand, reducing the frequency of manual cleaning by 50%.

4. How to fix the support for desert soft foundation?

A: We offer two options: spiral ground piles (suitable for sandy areas) and concrete counterweights (suitable for quicksand areas), with a wind resistance of up to level 12.

5. What is the lifespan of the motor?

A: Sealed brushless motor has a lifespan of ≥ 15 years and supports single machine replacement (without the need to disassemble the overall bracket).

6. Is it compatible with double-sided photovoltaic modules?

A: Support dual sided components+tilt tracking collaborative optimization, with an additional 10% -18% increase in backside power generation gain.

7. Investment return cycle?

A: Desert areas have excellent light resources, with a payback period of about 2-4 years (compared to fixed brackets).