| Customization: | Available |
|---|---|
| After-sales Service: | 30 Years |
| Warranty: | Steel Structure for 15 Years Solar Modules for 5 Y |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Quick and Easy Setup Process Aluminum Alloy Solar Roof Mounting Brackets for Metal Roof
All-climate aluminum metal roof PV racking - pre-assembled design, 5-minute installation
Designed for metal roofs (color steel tiles, aluminum zinc panels, standing seam roofs, etc.), it uses a 6005-T5 aluminum alloy body (anodized ≥ 15μm) with a Kliplok-style non-penetrating clamps, combined with a dynamic tilt adjustment system, to achieve rapid deployment without welding or penetrating the roof. Certified for 45m/s wind load and 1.5kN/m² snow load. Suitable for 60/72pcs standard modules, with a load capacity of up to 120kg, and a tilt adjustment range of 0° - 40°, suitable for commercial and industrial applications. Tilt angle adjustment range of 0°-40°, suitable for industrial, commercial and residential scenes, life expectancy of more than 25 years.
Product advantages
1. Extremely fast installation
Pre-assembled guide rails Pre-installed guide rails: 90% of the components are processed in the factory, and only snap connections are required on site (tool requirement: 1 torque wrench)
5 minutes/group: single person operation to complete the fixture fixing and component fixing. 5 minutes/group: one man operation to complete the fixture fixing and component fixing, saving 70% of labor time compared with traditional solutions
2. All-weather protection
Wind exposure resistance Dynamic expansion joint design to offset thermal expansion and contraction (±30mm), passes dynamic wind load test
Corrosion resistance: self-healing anodized layer technology, salt spray test ≥1,500 hours 3. Economy and compatibility
Zero roof damage: Non-penetrating fixture pressure ≥ 250N/m², compatible with 250N/m², compatible with roof types such as color steel tiles, aluminum sheets, galvanized sheets, etc.
Lightweight: 50% weight reduction compared to steel brackets, 35% reduction in transportation and labor costs
Installation and Commissioning
3-step installation process
Roof Assessment
Confirm roof panel thickness ≥0.5mm, measure slope (error ≤±2°)
Positioning of fixtures
Arrange one set of fixtures every 1.2m along the ridge, calibrate pressure to 250N/m² Component fixing Connect rail to component frame using quick release clips, calibrate torque wrench to 15Nm Commissioning points 250N/m²
Fixing of components
Use quick-release clips to connect the guide rail to the component frame, and calibrate the torque wrench to 15Nm
Commissioning Points Use a laser range finder to check the parallelism between groups (deviation ≤1mm/m)
Check the compression rate of EPDM adhesive tape after a rainstorm (should be ≥25%)
Q1: Does it support shaped metal roofs (e.g. wavy, trapezoidal)?
A: Yes! We provide customized fixture service and complete the adaptation plan within 3 working days, which is compatible with all standard roof types.
Q2: Do I need a professional technician for installation?
A: No! Our engineers provide remote online installation guidance, step-by-step animated instructions are available through your cell phone, and can be completed by one person independently.
Q3: What is the maximum wind resistance?
A: Dynamic wind load test, displacement ≤2mm, wind ballast block provided. Optional accessories are available.
Q4: What does the warranty cover?
A: 10 years full warranty Covers material breakage, connection failure and waterproof sealing problems, additional insurance for natural disasters (e.g. over 60m/s typhoon).
Q5: How often and how much does it cost to maintain?
A: Quarterly simple checking of fixture pressure, annual maintenance only requires cleaning of the guide rails for dust accumulation. The total life cycle maintenance cost is 50% less than steel bracket.
){kind=link}