Factory Wholesale HDG or Aluminum Solar Panel Mounting Hardware Tile Roof

• Customization: Available
• After-sales Service: 30 Years
• Warranty: Steel Structure for 15 Years Solar Modules for 5 Y
• Model NO.: Solar Hardware-01
• Certification: GB, ISO, CE, RoHS
• Application: Home
• Material: Carbon Steel or Alumium
• Type: Roof Bracket
• Sample: Free
• Design: Free
• Coating: HDG or Anodic Oxidation
• Molding Process: Rolling and Forming of Zinc Aluminum Magnesium Str
• Parts: Wooden Boxes or Pallets
• Profile: Tied with Steel Strips
• Transport Package: Standard
• Specification: custom
• Trademark: JCHX
• Origin: Tianjin, China
• Production Capacity: 100000 Tons / Year

Product Description

Product Description

Factory Wholesale HDG Or Aluminum Solar Panel Mounting Hardware Tile Roof

This system is designed with a combination of hot-dip galvanized steel (HDG) and aluminum alloy (AL6005-T5), specifically designed for tile roof scenes (glazed tiles/clay tiles/glazed tiles). It is quickly installed through modular pre installed accessories, supports ± 15 ° tilt angle adjustment, and is compatible with single/double glass components. The system has passed the 60m/s wind speed test (level 17 typhoon) and the 2.0kN/m ² snow load certification, with a maximum load capacity of 120kg per unit, which is 35% lighter than traditional galvanized steel brackets.

Name	Performance
Material	HDG steel (local galvanized layer ≥ 45 μ m)+AL6005-T5 aluminum alloy (anodized layer ≥ 15 μ m)
Load bearing capacity	Single set guide rail ≥ 120kg, whole system ≥ 500kg
Wind-resistant performance	Tested at a wind speed of 60m/s
Snow carrying capacity	Rail span ≤ 2.5m, no reinforcement required
Dip angle	0-45 degree Adapt to different latitude lighting optimization
Installation efficiency	Pre installed guide rail and buckle design, single person can complete 10kW system installation in 8 hours
Size	41*41/41*52/41*62/41*72/41*21mm or Custom
Corrosion resistance	Good
MOQ	1000 Watts

 

 

3-step quick installation
Roof adaptation:
Configure concrete ballast blocks (density ≥ 2400kg/m ³) or rubber pads with a pressure ≥ 250N/m ².
Modular assembly:
The guide rail adopts SnapLock buckle interface, which completes 90% of the connection by hand and reduces tool usage by 70%.
Tilt angle adjustment:
The gear type angle adjustment device achieves precise adjustment (± 0.5 ° error) and is suitable for optimizing lighting in all seasons.

Maintenance Guide
Daily inspection: Check the fixture pressure (≥ 200N) and the looseness of the guide rail connectors every quarter.
Anti corrosion treatment: The aluminum alloy oxide layer is maintenance free for life, and galvanized steel components are coated with anti rust paint every 5 years.
Extreme weather: Check the integrity of expansion joints (3mm/2m) after typhoons, remove snow after snowfall, and recalibrate the tilt angle.

Application scenarios

1. Traditional tile roof photovoltaic renovation (case: European castle)
Challenge: Protection requirements for historical buildings, complex tile types (such as Bardeau glazed tiles)
Solution: Non penetrating fixture+customized curved guide rail, compatible with over 90% of tile types, certified by UNESCO.

2. Industrial plant roof (case: Southeast Asian factory)
Challenge: Annual average salt spray concentration of 350mg/m ³, historical maximum wind speed of 55m/s
Solution: Hot dip galvanized fixture+optimized wind resistance with a tilt angle of 25 °, zero corrosion failure of 500kW system.

Company Profile

Our Advantages

Packaging & Shipping

FAQ

 

Q1:  How to balance strength and weight in material combinations?

A:  Galvanized steel is responsible for high stress components (such as fixtures), while aluminum alloy is responsible for lightweight guide rails, resulting in an overall weight reduction of 35% and a 20% improvement in wind resistance performance.

Q2: Does installation require damaging tiles? How to ensure waterproofing?

A:  Using fixtures for compression (pressure ≥ 250N/m ²) or rubber pads for fixation, no drilling is required, and EPDM waterproof rubber strips are embedded at the connection of the guide rail.

Q3: How long is the warranty period? Does it cover extreme weather?

A: 10-year structural warranty: covering design defects such as material breakage and loose connections.
Extreme weather protection: Designed with ± 50mm expansion joints, but additional insurance is required for typhoons exceeding 60m/s.

Q4: Which tile types are compatible? What is the minimum order quantity?

A: Compatible with tile types: glazed tiles, clay tiles, Bardeau glazed tiles, etc., providing specialized trapezoidal/sine wave fixtures.
Minimum order quantity: 50 sets of standard products (approximately 25kW system), customized fixtures require additional mold opening fees.

Q5: What is the cost-effectiveness? What are the advantages compared to traditional brackets?

A: Initial cost: 25% lower than pure aluminum alloy brackets and 15% higher than galvanized steel brackets (due to a higher proportion of stainless steel).
Long term returns:
Maintenance cost: 30 years of maintenance free, saving 3% -5% of annual anti-corrosion costs for electroplated zinc brackets.
Power generation efficiency: Supports ± 15 ° tilt angle adjustment, increasing power generation by 12% -18%.